Fence Installation &
Fence Repair

It depends on the local regulations in your area. It’s always best to check with your local building department before starting any construction project, including installing a new fence.

The cheapest fence to have installed is typically chain link or wood picket. However, it’s important to consider the long-term costs of maintenance and potential repairs.

The cost of a fence per foot can vary greatly depending on the type of fence and materials used. On average, a wood privacy fence can cost around $25-$35 per linear foot while a vinyl privacy fence can cost around $35-$50 per linear foot.

It can be cheaper to install a fence yourself, but it also depends on your experience and the complexity of the project. It’s important to consider the cost of tools, materials, and any potential mistakes that could lead to additional costs.

You also need to remember that the prep work to get all the tools and materials to your project site, as well as the rental costs, often outweigh the savings of having a professional fence building company do the project for you.

The difficulty of installing fencing can vary depending on the type of fence and your experience with DIY projects. Remember, we can take care of the hardest and most crucial part of your fence building project, which is the post hole digging and installation. We will even guide you on the best way and techniques to build the fence yourself.

The easiest fence to install is typically a chain link fence. It is easy to install and can be done by one person.

To keep a wood fence from rotting, it’s important to use pressure-treated wood, and to apply a water-repellent sealant. Also, make sure to keep the bottom of the fence elevated and away from moisture.

You will first need to take apart the 2 sections of the fence that are supported by the post. If these planks are in good shape you should keep them, so be careful during the removal process. You will then need to excavate the post along with the concrete that is holding it in place, take your time as this is a labour intensive process. To make it easier to remove the post, either break down the concrete holding it in place or dig around and take out the post as one piece.

You will now have to ensure that your post hole is dug to the right depth and clear any debris. Finally you can set your new post, pour the concrete and after 24 hours, re-attach the existing sections.

It is not recommended for a wood fence to touch the ground as this can lead to rot and damage to the fence. It’s best to have a gap between the bottom of the fence and the ground to allow for proper drainage.

The time required to build a fence will depend on the size and complexity of the project, as well as the materials used. Typically, it can take anywhere from a few days to a few weeks to build a standard fence. Once we have assessed your needs and preferences, we can give you a more accurate estimate of the time required to complete your project.

Remember, since we are able to complete the longest and most laborious part of digging post holes and setting posts in 1 day with the use of our advanced digging equipment, our timelines are generally superior to that of our competitors.

The best material to use for a fence will depend on your specific needs and preferences. Some popular options include wood, vinyl, aluminum, and wrought iron. Wood is a popular choice for its natural look and relatively low cost. Vinyl is known for its durability and low maintenance. Aluminum is known for its low maintenance and resistance to rust. Wrought iron is a popular choice for its durability and elegant look.

If you need help deciding what material would be the best for your application and work within your budget, reach out directly to Post2Fence fence specialists by email or phone today.